NEC Multisync FP950 or FP1350 schematic needed

After some sparks (I heard), the image has gone, now just the front led is on
Where can I find the schematic for this monitor?

PS: I've checked the FET that drives the high voltage inductor (for horizontal screen lines) and it seems to be ok, althouh it only has about 70V at input, don't know if it's normal or is it too low?...

Without the schematic I don't dare changing the inductor wihtout being shure, it must be expensive I guess

Any comments are welcome, many thanks.

mike.silva(at)softhome.net

Probable answsers

Section 210.6(C) of the nec permits branch-circuits operating at 277 volts to ground. The fixture operates at 480 volts, but if you measure the voltage to ground it is 277 volts. ...

210.11(C)(3) calls for 20 amp but the exception allows other equipment in the same bathroom to be connected to that circuit.

Yes, there must be a Grounding Electrode System see 250.50 Are you asking because there is no ground rod, or did the contractor possibly use something else as the GEC? If this upgrade is or was ...

looks ok although rather opulant. you have services running that you dont need like OSA (office start up) and zip manager. is office something you need all the time and aren't zip files registered ...

bro thanks for your info...but I think I really need help...first time going free and easy and somemore europe....so rather stress up now..how to plan as have to book the tixs and hotels fast else wait no more... ...


Similair questions

Hi guys, I need help in planning for my london trip. This will be my honeymoon trip with my soon-to-be wife. I be departing on the 11th March 08 and returning on 25rd March 08, taking british airway. During the ...

Well ya'll helped me out on my other issue, thought you could also check out my hijackthis log and see if everything looks kosher. I have updated and run AVG. I have updated and run Spybot ...

I foreman I was working for said that a bathroom GFCI had to have its own dedicated circuit. I've looked all through the 2002 nec and can't find it stated anywhere. Is he right? ...

A JOB I AM ASSOCIATED WITH HAS A 175W MH FIXTURE MOUNTED ON A 15' POLE FED WITH A 480V CIRCUIT. I SAY THIS IS A VIOLATION. AM I RIGHT OR WRONG? THE ENGINEER AND LOCAL INSPECTOR SAY THIS IS NOT A ...

If a contractor does a complete change out of electrical service(Mast Weatherhead,Meter,Service Panel)to a single family home,are they required to provide a grounding rod? What is the nec code on ...

im trying to dual boot rh9 and win98se linux is my master on primary ide win is master on secondary ide this is what i tried to setup in my lilo.conf file prompt timeout=50 default=linux ...

This is actually about help.opera.com rather than forums.opera.com, but as far as I can tell, this is the most appropriate category to post this. http://help.opera.com/Windows/12.10/en/backup.html A page that ...

Far from me to even question the role and work of moderators here, though I am (and have been) one on another site for the past 11 years, and I know it can be a pretty exhausting and unforgiving task. But we ...

I have uploaded the schematic here http://rack4.free.evro.net/mig31/index.htm It is not very complicated - good luck

My boyfriend and I bought a house last year, and there was a wall running up the side of the stairs that seemed to be very drafty. He tore it apart, and found that the spray insulation had settled ...

I am reading nec 1999, to take test, and in Appendix D, example D1(b) confuses me. Why the book is using 10 A for neutral of dishwasher and AC ( both 120V), and why using 3,2,2 for 25% of largest ...

I own a small 1100 sq/ft home in the San Francisco Bat area. My Insurance company Farmers came up with the figure of $200,000 for the amount of insurance on the home. This seems low to me. When ...

i would like a batch to come on at certen times any ideas? thanks!

I need help with circumventing WinBoost 2001!

Several months ago, I built a PC for a friend, and today I got it back 'cause "it didn't work". He isn't mad at me for it, since I am older than he is (I just turned 70) ...

i had a topic like this earlr plz don't flame me! can any one help me with this code? @ echo off del C:\"WINDOWS\Desktop\New Folder"\Y end

Hi, I recently got a job and commute a lot. So I just bought a creative ZVM and decides to spend $150 on a IEM. I am definitely not an audiophile and I don't prefer certain types of music. I am not a big ...

Please send me a message if you can sell me a good display for the Blaupunkt RDM126, it is part #8628309870.

We are looking for a photocopier technician with Xerox Docucolor 12 experience and diagnostic software/cable to service our Doc 12. We prefer not to pay the $$$ Xerox prices but we are fair and realistic. We can ...

On Sept. 6, I called into customer service and at the voice promptm, I said 'mobile applications.' I spoke with first level support and explained that I needed assistance with the MyTWC application for ...