USB via breakout, or extending wires?

I need to move the location of a usb port

Does a usb breakout board exist? Or is it possible to solder on some leads to the existing usb ports and feed them back in? Or will this cause issues/ break the port.

I need the port internal purely to feed back as the host port for a usb hub

Probable answsers

Cruise on over to http://www.driverguide.com/indexddc.htm and see if you can find it there. Username is "drivers" (no quotes), p/w is "all". If the usb is built into your ...

David Some people will refer to 330.3(C)(1) and think that the insulation rating is the key. As Don has posted, 725.55 is where you will find your answer. Read to understand, not for speed. Pierre ...

Not on the list, and I don't know exactly where Mitsai products are sold outside Portugal, but these work fine (with an on/off switch too).http://www.worten.pt/ProductDetail.aspx?pid=04650295&oid=&c=Regards ...

lol it feels like I'm following mystyler around telling you not to do multiple posts...once again, go to the NetMD forum and look there. And yes...DON'T DO MULLTIPLE POSTS!

ok ditch the linux problem, hopefully someone can help me with this one though. i've been putting a computer together for my friend the past couple of weeks but have experienced many problems ...


Similair questions

With occasional threads suggesting that the Pi has problems when asked to power too many usb devices, can we have a few recommendations for specific powered usb hubs from those who are already succesfully using ...

If the insulation of a class 2 wire is rated at 600 volts, can it be in the same conduit as a class 1 wire?

when I try and use my palm or intel cam I am told that my usb port is missing. I am running windows 98se, I have an AMD-k6 mother board. Been to their site to try and find the driver but no ...

i was having a bit of trouble using a wireless usb device with red hat linux 9 on my machine, i haven't tried a lot of things yet but i was hoping someone may have had experience on this and ...

Hope you can help. I purchased a NetMD MZN1L for my son at Xmas. However, from the Open MG 2.2 software supplied it seems I cant connect it to my PC without completely upgrading my PC! It's a Compaq Deskpro ...

I inserted my Kingston Datatravler G2 16 GB usb stick into the Raspi. It's formattet as fat32.All I get is an endless loop in dmesg like this:usb 1-1.3: new high speed usb device number 85 using dwc_otgusb 1-1.3: ...

Does anyone know how the N800 interacts with a Windows XP machine when the they are plugged together via usb? Here's what happened: When I first got my "virgin" N800, I could connect it to a Windows ...

I can't find - is anybody think about this idea 1) Device has usb 2) Device has virtual keyboard Can it work as usual usb keyboard? After all this idea has some features ...

Can I jump on a network thru the usb to my laptop? In other words, if my laptop is on line, can I use the usb and use my N800 on the same network?

Is there a 'maximum' amount of wires that can be connected to a strobe light? I have searched through NFPA 72. ? :confused:

I recently purchased the Netgear MA111 wireless adapter, as well as Netgear's wireless router. The router works fine w/ the computer when the computer was plugged into it via ethernet cable. However, when I try ...

What do you guys think about the Galaxy Note 3 Micro usb 3 port? http://www.droidforums.net/attachments/66206/ http://www.droidforums.net/attachments/66222/ ​   ...

I was following this project mainly because of the size/form factor.With the size increased, what gonna be the advantage over already existing plugcomputer?Sheva, guru, dream, D2, etc...Edit : Thx for all the answer, ...

hi! i'm doing some research 4 work... we provide (@ work) usb DSL modems (globespan). we found out that there are some problems with a lot of mobo's... the problems are that the modems loosing their Sync ...

I play my music from my laptop and am thinking of buying an external DAC so I would need to get the audio from my laptop to the DAC. What's a good usb or Firewire Mac OS X compatible digital out? Is there ...

According the M-Audio, the Audiophile usb is supposed to be able to support 24bit/96khz ASIO. Unfortunately I'm unable to get it to work in Foobar2000. Can anyone help? I'm able to use Kernel Streaming semi-successfully ...

well not on the RPi but ...I have a 2.5" external hard disk enclosure and HD to go with.I was going to be boxing and RPi with said HD and powered 7 port usb adapter [well it all works external to the case]now ...

I have an idea for a case design (I'm not sure if anyone else has thought of this, I did a quick search but couldn't see anything).Similar to old style micro computers, have the R pi integrated inside ...

Have installed a couple of OSes over the last couple of days to test them out. Grub is installed and everything looks fine - I see my linux install selected as default and I see my ...

Hi,How many highspeed devices are handled with the LAN9512 chip on the B board?We want to make the Kinect camera ethernet capable, but it requires a usb highspeed controller for that and if the ethernet port is ...